Water and oil-cooling systems

These are best suited for the cooling of, for example, high-frequency spindles of high-performances drills used in the production of circuit boards. In this field very small manufacturing tolerances of just ± 0.002 mm are required. The water temperature must be maintained constant so that the drills do not overheat. A constant water temperature provides the accuracy required for the drilled circuit board, even at high spindle RPMs.

So that the high working precision of machine tools and other machines can be guaranteed, constant spindle oil, lubrication oil and gear temperatures are mandatory. Obtaining an optimum cooling result depends on many factors. Only through an accurate analysis of the prevailing characteristics can the optimum solutions be found for each application. Modern cooling systems help to keep operating costs down, with the result that cooled machines and tools last longer and work more accurately. Well-regulated cooling leads to higher workpiece throughput and improved quality in the production.  A cooling system also permits a range of different cooling cycles with various media and different medium temperatures.

An example: for a machine tool the spindle and gear oil is cooled by means of a cooling system. At the same time the switching cabinet is cooled with water via an air/water heat exchanger.

We offer different sizes, these find you under Downloads

General prospectus

• Sheet "Your Partner for Cooling Systems"
  
  

Modell-Übersicht

• Modellübersicht OSC 910 Wasserkühlsystem CW
• Modellübersicht OSC 900 Ölkühlsystem CO